Dynamical evolution of high area-to-mass ratio debris released into GPS orbits

A large set of simulations, including all the relevant perturbations, was carried out to investigate the long-term dynamical evolution of fictitious high area-to-mass ratio (A/M) objects released, with a negligible velocity variation, in each of the six orbital planes used by Global Positioning System (GPS) satellites. As with similar objects discovered in near synchronous trajectories, long lifetime orbits, with mean motions of about 2 revolutions per day, were found possible for debris characterized by extremely high area-to-mass ratios. Often the lifetime exceeds 100 years up to A/M ∼ 45 m²/kg, decreasing rapidly to a few months above such a threshold. However, the details of the evolution, which are conditioned by the complex interplay of solar radiation pressure and geopotential plus luni-solar resonances, depend on the initial conditions. Different behaviors are thus possible. In any case, objects like those discovered in synchronous orbits, with A/M as high as 20–40 m²/kg, could also survive in this orbital regime, with semi-major axes close to the semi-synchronous values, with maximum eccentricities between 0.3 and 0.7, and with significant orbit pole precessions (faster and wider for increasing values of A/M), leading to inclinations between 30° and more than 90°.     

Indicators of black-hole mass and Eddington accretion ratio from QSO X-ray and UV spectra

The evolution of luminous QSOs is linked to the evolution of massive galaxies. We know this because the relic black-holes found locally have masses dependent on the properties of the host galaxy’s bulge. An important way to explore this evolution would be to measure dependences of black-hole masses and Eddington accretion ratios over a range of redshifts, i.e., with cosmological age. For low redshift QSOs (and their lower luminosity Seyfert galaxy counterparts) it has been possible to infer black-hole masses from the luminosities and velocity dispersions of their host-galaxy bulges. These masses agree with those virial black-hole masses calculated from the Doppler widths of the broad Hβ emission lines. The latter method can then be extended to more distant and luminous QSOs, up to redshifts of 0.6 with ground-based optical observations. We discuss ways to extend these explorations to higher redshifts – up to 3 using the widths of QSOs’ broad UV emission lines, and in principle, and to redshifts near 4 from ground-based infrared observations of rest-frame Hβ at 2.5 μm. We discuss the possibility of investigating the accretion history of the higher redshift QSOs using measures of Eddington accretion ratio – the soft X-ray spectral index and the eigenvectors of Principal Components Analyses of QSOs’ UV emission-line spectra.     

关于适当布置构造柱以提高墙体承载力的探讨

针对当前七、八层砖混结构住宅在不增加墙体厚度的前提下，通过适当布置构造柱，来提高墙体承载力，因而达到增大使用面积的目的。     

穿越微下冲气流的飞翼布局无人机控制方法

微下冲气流是最危险的低空风切变形式,为在起降阶段安全穿越该气流,飞翼布局的无人机控制律应具有快速响应能力和良好的鲁棒性。针对大展弦比飞翼布局无人机舵面附加升力大和低速状态俯仰操纵效能低的特点,提出了舵面附加升力和机体气动力相结合的复合控制方案,改进了以输出误差为参考量的非线性指令分配策略,设计了基于迎角保护的指令分配策略。将风干扰和模型的不确定性视为未知扰动,采用自抗扰控制(ADRC)理论设计飞翼布局无人机非线性控制律,使之对风干扰和模型的不确定性进行估计补偿。仿真结果表明,复合控制与ADRC相结合的方法加速了航迹倾角的单位阶跃响应速度,使上升时间缩短了64%,同时能够实现对风干扰的有效观测和补偿,使高度损失低于2m;能够在风切变中有效保护迎角,使其维持在5.5°以内。因此,该方法能够为飞翼布局无人机安全平稳地穿越微下冲气流提供一种参考方案。     

油气比及进口参数对三级旋流器燃烧室性能的影响

对三级旋流器燃烧室进行了常压试验研究.研究首先设计研制了三级旋流器燃烧室模型和试验系统,然后在此基础上开展了不同进口速度、进口温度和油气比等参数影响三级旋流器燃烧室的流阻特性、点火特性、贫油熄火特性和燃烧效率特性等性能的试验研究.结果表明:该三级旋流器燃烧室可以在不同试验工况下顺利点火和稳定工作,点火性能基本不受进口速度的影响;总压损失系数随进口速度的增加而增大,而流阻系数随速度的增加而减小,燃烧室流动未进入"自模状态";随着进口温度的增加,点火、贫油熄火性能变好,燃烧效率提高.     

超声速串列静叶积叠优化分析

在进口超声速、气流转折角大的高负荷条件下,静叶通道中激波强度高,激波、附面层干扰引起的损失大,且静叶中三维流动引起的径向载荷分布不均匀,易产生角区分离。叶片积叠优化是提高风扇性能的一项有效技术。采用数值模拟的方式研究了不同积叠形式对优化串列静叶沿展向激波结构,改善叶排间流动匹配的作用。三维流动对比分析可以得出:高负荷串列静叶采用正弓形积叠,叶片展向载荷分布合理,静叶端壁角区分离损失减小,前后叶片排流动匹配较好,风扇性能进一步提高。     

核翼比法进行表面粗糙度的标定及测量

介绍了一种表面粗糙度标定及测量的新方法。通过标定一组标准样块的核翼比，可以实现该标定范围内待检样块的粗糙度测量，该方法稳定可靠，试验装置简单，数据处理方便，为表面粗糙度的非接触测量提供了较好的方案。     

载人航天器密封系统漏率设计方法

载人航天器密封舱为航天员提供在轨生活、工作的环境,对密封舱及其环控生保系统、热控制系统、推进控制系统等中各管路的密封性能有严格要求。文章提出了一种漏率设计方法,建立了相应的漏率检测系统,并依据该方法制定了密封舱体和各管路的漏率设计和指标分配的流程。本流程可用作载人航天器舱体密封系统、管路密封系统的漏率设计,对保证载人航天器在轨安全可靠运行有重要参考价值。     

不同流速比超声速混合层气动光学效应研究

针对不同流速比混合层流场气动光学效应问题，首先采用大涡模拟数值方法进行了数值仿真，其次用光线追迹方法进行了气动光学效应仿真，最后对混合层的气动光学效应进行了评价。结果表明，混合层流场涡结构与光程差极小值存在一一对应关系，并且其流速比低的混合层气动光学效应更加严重。同时，研究了不同光学参数对斯特列尔比的影响，得到了相应的规律。     

纵向波纹隔热屏气膜冷却特性实验

针对加力燃烧室纵向波纹隔热屏气膜冷却效果开展了细致的实验研究,利用红外热像仪测量了隔热屏壁面的温度分布,分析了隔热屏板型、吹风比、开孔率等参数对气膜冷却效率的影响。实验中板型选取了平板和纵向波纹隔热屏,吹风比变化范围是0.5~3.0,开孔率变化范围是1.4%~3.7%。结果表明:相比于平板隔热屏的气膜冷却效率沿程逐渐增加,纵向波纹隔热屏的气膜冷却效率随波纹板的起伏而起伏且大于平板隔热屏;随着吹风比的增加气膜冷却效率逐渐加大,在吹风比为3.0时达到最大值;气膜冷却效率在波峰处低,波谷处高,整体上随波纹板的起伏而波动,吹风比越小,气膜冷却效率随波纹板的起伏变化越明显;高吹风比(吹风比为2.0~3.0)下,气膜冷却效率沿程变化与增幅较为缓慢;整体上,随着开孔率的增加气膜冷却效率逐渐加大,小开孔率(开孔率为1.4%、2.7%)下的气膜冷却效率相差不大,但在次流背风侧,开孔率小的气膜冷却效率要小于开孔率大的气膜冷却效率。